Equipment Repair — Lost Creek, TX

Equipment Repair in Lost Creek, TX

No two Lost Creek pools are the same age, and equipment repair here has to account for that. Wrapped around the Lost Creek Country Club golf course in the 78735 zip code, the community runs the full range — 1970s gunite builds on flat interior lots still on 1980s equipment, alongside 2000s renovations with salt systems, automation, and infinity spas. The Pool Police has repaired Lost Creek equipment since 2000, so we read each pad for what it actually is: bearing and seal rebuilds on the older single-speed motors, controller and salt-cell diagnostics on the newer multi-body systems, and heater service across both. Many pools sit on hillside lots with elevated or tucked-away equipment pads, so access shapes the repair as much as the part does. The heavy oak canopy off the Balcones Canyonlands edge loads filters and pump baskets year-round. Keith Mallette's approach stays fix-first — rebuild what's worth rebuilding, and recommend an upgrade only when the age and repair cost genuinely justify it.

Typical Pricing $125 diagnostic visit + parts and labor at fixed rates Diagnostic fee is applied toward the repair if you proceed. Common repairs (pump seals, O-rings, timer swaps) start around $185 complete. See full pricing guide →
What's Included

What We Do

Diagnose pump motor failures, impeller clogs, and seal leaks — repair or replace as needed
Service and rebuild sand, cartridge, and DE filters to restore proper flow and filtration
Repair gas and electric pool heaters — ignition issues, heat exchangers, thermostats, and control boards
Replace worn salt chlorine generator cells and recalibrate output levels
Troubleshoot and repair pool automation systems — timers, relays, and smart controllers
Install energy-efficient variable-speed pumps to cut electricity costs by up to 70%
Why Choose Us

Why The Pool Police?

Fix-first philosophy — we don't push replacements you don't need
We stock common parts on the truck so many repairs finish the same day
Experience across all major brands: Pentair, Hayward, Jandy, Zodiac, and more
Clear pricing before we start — no surprise labor charges
All repairs backed by a workmanship warranty
On the Ground in Lost Creek

Local Conditions We Account For in Lost Creek

Every equipment repair visit in Lost Creek is calibrated to the conditions that make pools here different — not a generic checklist:

Golf course community with many pools featuring water features, spas, and complex designs
Hill Country terrain means pools on hillside lots with elevated or tucked equipment pads
Mix of 1970s original builds and 2000s renovations — equipment ages vary dramatically by lot
Heavy oak canopy from the Balcones Canyonlands edge drops constant organic debris
Austin Water to 78735 with consistent alkalinity pushing pH high between visits
Service Area

Neighborhoods We Serve in Lost Creek

Lost Creek Club area Barton Creek edge Travis Country edge 78735
Common Questions

Frequently Asked Questions

Do you service pools in the Lost Creek community (78735)?

Yes. The Pool Police runs an established weekly route through Lost Creek, covering the full community from the older flat-lot streets near the golf course to the newer hillside builds on the canyon edges. We've serviced pools here since 2000.

My Lost Creek pool has an integrated spa and water feature — can you handle complex pools?

Absolutely. Many Lost Creek pools were built with spas, waterfalls, laminars, and raised beam features that require careful cleaning and chemistry balanced across interconnected water bodies. Our techs are experienced with these multi-body pool systems and understand how water flow, evaporation, and chemical consumption differ from a basic rectangular pool.

How do you handle the Balcones Canyonlands leaf load in Lost Creek?

Lost Creek's canyon-edge lots sit directly under dense oak and cedar canopy. We increase skimmer basket checks, monitor filter pressure more aggressively through fall and cedar season, and run phosphate control chemistry to prevent decaying organics from feeding algae. Hillside lots with elevated decks often benefit from a leaf net during peak drop weeks.

My pool pump is making a loud screeching noise — what should I do?

A screeching pump usually means the bearings are failing. Turn the pump off to prevent further damage and call us. Bearing replacement is far less expensive than a new motor, but only if caught early before the shaft or windings are affected.

How long do pool pumps typically last in Austin?

A standard single-speed pump motor lasts around 8 to 12 years in our climate. Variable-speed pumps tend to last longer because they run at lower RPMs. Proper chemical balance and regular service extend the life of any pump.

Should I repair my old equipment or replace it?

It depends on the age of the unit and the cost of the repair. As a rule of thumb, if the repair exceeds 50% of replacement cost and the unit is past its expected lifespan, replacement usually makes more sense — especially with newer energy-efficient options available.

Ready to Get Started?

No contracts, no hidden fees. Just reliable, professional pool service from a family that's been doing it for 25+ years.

(512) 300-4136